It is currently Sat Dec 16, 2017 3:41 pm




 Page 1 of 1 [ 9 posts ] 
Author Message
 Post subject: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Sun Oct 28, 2012 9:31 pm 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
Shannon Wix - BBC 647cid 1387 HP sets Evadale, Texas DoorSlammer Record - October 27th , 2012

October_5_2012 Shannon Wix 4.656x4.750=647.1 cid
C & S Performance built

Peak HP= 1387.2 at 8000 RPM

Dart/Olds 14deg 2.500/1.850 Max Ported by Meaux
Bad Port= 568.1 CFM at 1.100" Int / 358.7 CFM at 1.000" Exh .... 570's CFM on Good Ports
Cam Motion 118 centers on 118 CL
Jesel 2.00/1.95 Rockers 1.140/1.092
2 ProSystems 1300 CFM 96 jets + anti-reversion plates
Q-16 Race Gas
Billet Fab 2-piece full kickout relocated starter
15:1 CR Diamond 8 cc domes
ProFiler Tunnel Ram 1.5 thick plenum spacers Max-Ported by Meaux
Star ProMod Vac Pump
2.375, 2.500 5.000 Collector
_____________________

add 1/2 inch plenum spacer
34 btdc
248 cranking psi at 150 rpm ( 16-Volts )

Shannon_Wix___Evadale_Texas__Oct_27_2012
( All Motor , no NOS )
1.0896
3.0306
4.6308-154.06
6.0009
7.1554-195.65


Old Record was :
1/4 MPH Record – Door Slammer
Todd Moyer
Pasadena, TX
MPH -193.7
Set on: July 21, 2007


Image



_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
 Post subject: Re: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Sun Oct 28, 2012 9:31 pm 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
Image



_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
 Post subject: Re: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Sun Oct 28, 2012 10:01 pm 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
Image



_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
 Post subject: Re: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Sun Oct 28, 2012 10:02 pm 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
Image



_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
 Post subject: Re: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Sun Oct 28, 2012 10:02 pm 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
Image



_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
 Post subject: Re: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Sun Oct 28, 2012 10:03 pm 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
Image



_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
 Post subject: Re: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Sat Mar 16, 2013 4:48 pm 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
Update : March 16, 2013

Shannon Wix runs : ( 2nd License Run ) with 200 HP NOS kit
1.026
2.903
4.445 at 160.31 MPH
5.763
6.877 at 201.88

Stall on 200 HP NOS = 6500 RPM
Shift RPM = 8300 RPM ... drops to 7200 RPM after gear exchange
Cross RPM = 8200 RPM

1755 Ft Density Altitude

Peak TQ= 1171.8
Peak HP= 1637.8 @ 8000 RPM






_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
 Post subject: Re: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Sun Mar 24, 2013 9:42 pm 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
Update : March 23rd 24th , 2013 No Problem Raceway

Qualified #4 in Top Sportsman
1.009 :shock: ... killer 60ft w/powerglide ( 350 HP NOS ) 11.7:1 to 12.2:1 Air/Fuel Ratio
2.861
4.380-163.04
5.675
6.768-206.48 still #4 qualifier


David Shannon Wix had a great 1st competition Race event

Shannon's 647 cid was one of the smallest size engines out there
along with the least amount of NOS adder + was 80 Lbs heavy for the Class


checkout the other Engine CID sizes Shannon's 647cid was up against
Image


Image



_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
 Post subject: Re: Shannon Wix - BBC 647cid 1387 HP
PostPosted: Fri Oct 06, 2017 11:41 am 
Site Admin
User avatar

Joined: Mon Nov 22, 2010 11:46 am
Posts: 1321
Location: Abbeville , Louisiana
http://dragstory.com/forum/index.php/topic,4262.0.html

2017 Lights Out 8 at South Georgia Motorsports Park
South Georgia Motorsports Park in Cecil, Georgia
No Mercy 8


Attachments:
KEN QUARTUCCIO LightsOut Oct6 2017.png
KEN QUARTUCCIO LightsOut Oct6 2017.png [ 482.87 KiB | Viewed 140 times ]

_________________
Meaux Racing Heads
MaxRace Software
ET_Analyst ( DragStrip Simulation Software )
PipeMax ( Engine Simulation Software )
http://www.maxracesoftware.com
http://www.maxracesoftwares.com
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 9 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron